
Flat Boat Trailer Rollers for Flat Bottom Boats
Stoltz flat bow rollers are polyurethane flat boat trailer rollers for boats with a completely flat bow, including flat bottom boats. Flat rollers come in 1 1/2″ and 3″ sizes, and the 3″ is also sold as a kit with flat end caps. To check the fit, measure the inside width of your bow roller bracket.
Please click on product for EXACT measurements.
How to choose a Flat bow roller in 3 steps
- 1Measure the inside of your bracketMeasure the gap between the inside walls of the bracket, not the outside. Never order a roller larger than your measurement.
- 2Roller only or a complete bow stop kitA complete kit, also called a bow stop, includes the roller, 2 end caps, a stainless bolt, 2 washers and a lock nut.
- 3Match the end caps to your bowFlat end caps only. Flat rollers are for a completely flat bow. If your bow has any curve, use a semi V roller.
1 1/2″ Flat Rollers
- Model: RP-31
- Actual width: 1 1/2″
- Bolt: 1/2″
- Roller only
1 1/2″ Flat Roller
Stoltz part # RP-31Just the roller. No end caps or hardware.Original price was: $16.99.$13.99Current price is: $13.99.
3″ Flat Rollers
- Model: RP-333
- Actual width: 2 7/8″
- Bolt: 1/2″
- Roller only
3″ Flat Roller
Stoltz part # RP-333Just the roller. No end caps or hardware.Original price was: $19.99.$17.99Current price is: $17.99. - Bow stop kit
3″ Flat Bow Stop Roller Kit with Flat End Caps
Stoltz part # RP-SK3 / RP333-325For a completely flat bow.Roller, 2 flat end caps, stainless bolt, 2 washers & lock nutOriginal price was: $39.99.$35.99Current price is: $35.99.
Is a flat roller right for your boat?
Match the roller to the shape of your bow. A flat roller fits a bow that is completely flat. If your bow has a slight curve, use a semi V roller. If it is aluminum with a wide ridge, or fiberglass with a keel strip, use a slotted V roller. If it is fiberglass with a pointy, deep V bow, use a deep V roller.
Flat roller sizes
| Inside bracket width | Roller | Model | Actual roller width | Bolt |
|---|---|---|---|---|
| 1 1/2″ | 1 1/2″ flat | RP-31 | 1 1/2″ | 1/2″ |
| 3″ | 3″ flat | RP-333 | 2 7/8″ | 1/2″ |
How to measure
Measure the inside width of your bow roller bracket. The 1 1/2″ flat roller fits a 1 1/2″ bracket, and the 3″ flat roller fits a 3″ bracket. All Stoltz bow rollers use a 1/2″ bolt.
End caps for flat rollers
Flat rollers come with flat end caps only. End caps mount on the outside of the bracket on the same 1/2″ bolt as the roller.
Flat roller FAQ
What roller do I need for a flat bottom boat?
A flat bow roller. It fits a bow that is completely flat, which is common on flat bottom boats.
What sizes do Stoltz flat rollers come in?
1 1/2″ (RP-31), which fits a 1 1/2″ bracket and is a full 1 1/2″ wide, and 3″ (RP-333), which fits a 3″ bracket and is 2 7/8″ wide.
Do flat rollers come with bell end caps?
No. Flat rollers come with flat end caps only.
Can I buy just the roller?
Yes. Both sizes are sold as single rollers (RP-31 and RP-333). The 3″ is also sold as a kit with flat end caps (RP325-333).
Do you ship outside the U.S.?
No. Boat Trailer Rollers ships within the United States only.
Is a bow roller kit the same as a bow stop?
Yes. A bow stop, or bow stop assembly, is the roller at the front of the trailer with its end caps. A Stoltz bow stop kit includes the center roller, 2 end caps, a stainless bolt, 2 washers and a lock nut. You can also buy just the roller to replace a worn one. Stoltz also sells V bumpers, also called V bow stops, in 3″ and 4″.








