Deep V Boat Roller 3

Deep V Boat Trailer Rollers

Stoltz deep V bow rollers are polyurethane deep V boat trailer rollers for boats with a pointy, deep V bow, which is common on fiberglass boats. They come in 2 7/8″, 3″ and 4″ sizes, as a single roller or a complete kit with end caps. To find your size, measure the inside width of your bow roller bracket.

Click on product for EXACT measurements.

How to choose a Deep V bow roller in 3 steps

  1. 1
    Measure the inside of your bracket
    Measure the gap between the inside walls of the bracket, not the outside. Never order a roller larger than your measurement.
  2. 2
    Roller only or a complete bow stop kit
    A complete kit, also called a bow stop, includes the roller, 2 end caps, a stainless bolt, 2 washers and a lock nut.
  3. 3
    Match the end caps to your bow
    Large bell for a sharp, deep V bow (the usual match), medium bell for a decent curve, flat for a flatter bow.
Jump to your size
Different bow shape? Slotted V rollers · Semi V rollers · Flat rollers

2 7/8″ Deep V Rollers

For a bracket with a 2 7/8″ inside width
  • Model: RP-443
  • Actual width: 2 3/4″
  • Bolt: 1/2″
The Stoltz RP-443 is a 2 7/8-inch deep V bow roller made of polyurethane, for boats with a pointy, deep V bow, which is common on fiberglass boats. It fits a bow roller bracket with a 2 7/8″ inside width. Its actual width is 2 3/4″, slightly smaller than the bracket so it can spin, and it mounts on a 1/2″ bolt. Buy it as a single roller or as a complete bow stop kit (bow stop assembly) with flat, medium bell or large bell end caps.
Bracket diagram: a 2 7/8″ inside gap fits a 2 7/8″ Deep V roller
Is the inside gap of your bracket 2 7/8″? Choose a 2 7/8-inch roller below. It is built slightly smaller than the bracket so it can spin.
↑ Choose a different size

3″ Deep V Rollers

For a bracket with a 3″ inside width
  • Model: RP-335
  • Actual width: 3″
  • Bolt: 1/2″
The Stoltz RP-335 is a 3-inch deep V bow roller made of polyurethane, for boats with a pointy, deep V bow, which is common on fiberglass boats. It fits a bow roller bracket with a 3″ inside width. Its actual width is 3″, and it mounts on a 1/2″ bolt. Buy it as a single roller or as a complete bow stop kit (bow stop assembly) with flat, medium bell or large bell end caps.
Bracket diagram: a 3″ inside gap fits a 3″ Deep V roller
Is the inside gap of your bracket 3″? Choose a 3-inch roller below.
↑ Choose a different size

4″ Deep V Rollers

For a bracket with a 4″ inside width
  • Model: RP-444
  • Actual width: 3 7/8″
  • Bolt: 1/2″
The Stoltz RP-444 is a 4-inch deep V bow roller made of polyurethane, for boats with a pointy, deep V bow, which is common on fiberglass boats. It fits a bow roller bracket with a 4″ inside width. Its actual width is 3 7/8″, slightly smaller than the bracket so it can spin, and it mounts on a 1/2″ bolt. Buy it as a single roller or as a complete bow stop kit (bow stop assembly) with flat, medium bell or large bell end caps.
Bracket diagram: a 4″ inside gap fits a 4″ Deep V roller
Is the inside gap of your bracket 4″? Choose a 4-inch roller below. It is built slightly smaller than the bracket so it can spin.
↑ Choose a different size

Is a deep V roller right for your boat?

Match the roller to the shape of your bow. A deep V roller fits a fiberglass boat with a pointy, deep V bow. If your bow is aluminum with a wide ridge, use a slotted V roller. If it has a slight curve, use a semi V roller. If it is completely flat, use a flat roller.

Deep V roller sizes

The size is the inside width of the bracket the roller fits. The actual roller width is listed so you can check the fit.

Inside bracket widthRollerModelActual roller widthBolt
2 7/8″2 7/8″ deep VRP-4432 3/4″1/2″
3″3″ deep VRP-3353″1/2″
4″4″ deep VRP-4443 7/8″1/2″

How to measure

Measure the inside width of your bow roller bracket and order the deep V roller with that size. All Stoltz bow rollers use a 1/2″ bolt.

How to choose end caps

Deep V rollers are offered with flat, medium bell and large bell end caps. End caps mount on the outside of the bracket on the same 1/2″ bolt as the roller.

  • Large bell end caps: for a sharp, deep V bow, the usual match for a deep V roller.
  • Medium bell end caps: for a bow with a decent curve.
  • Flat end caps: for a flatter bow.

Your boat should rest on the center roller. The end caps guide the bow, and the boat should never bend them.

Deep V roller FAQ

What is a deep V bow roller?

A bow roller with a deep V-shaped center that cradles a pointy, deep V bow. It is the usual choice for fiberglass boats with a sharp bow.

What sizes do Stoltz deep V rollers come in?

2 7/8″ (RP-443), 3″ (RP-335) and 4″ (RP-444). The size is the inside width of the bracket the roller fits.

What end caps go with a deep V roller?

Most deep V bows use large bell end caps. A bow with a gentler curve can use medium bell caps. Flat and medium bell caps are also offered.

Can I buy just the roller?

Yes. Each size is sold as a single roller or as a kit with end caps.

What size bolt does a deep V roller use?

All Stoltz bow rollers use a 1/2″ bolt. The end caps mount outside the bracket on the same bolt.

Do you ship outside the U.S.?

No. Boat Trailer Rollers ships within the United States only.

Is a bow roller kit the same as a bow stop?

Yes. A bow stop, or bow stop assembly, is the roller at the front of the trailer with its end caps. A Stoltz bow stop kit includes the center roller, 2 end caps, a stainless bolt, 2 washers and a lock nut. You can also buy just the roller to replace a worn one. Stoltz also sells V bumpers, also called V bow stops, in 3″ and 4″.

0