Semi V Boat Roller

Semi V Boat Trailer Rollers

Stoltz semi V bow rollers are polyurethane semi V boat trailer rollers for boats with a bow that has a slight curve. The 4″ semi V roller is sold on its own or as a complete kit with flat, medium bell or large bell end caps. To check the fit, measure the inside width of your bow roller bracket.

Please click on product for EXACT measurements.

How to choose a Semi V bow roller in 3 steps

  1. 1
    Measure the inside of your bracket
    Measure the gap between the inside walls of the bracket, not the outside. Never order a roller larger than your measurement.
  2. 2
    Roller only or a complete bow stop kit
    A complete kit, also called a bow stop, includes the roller, 2 end caps, a stainless bolt, 2 washers and a lock nut.
  3. 3
    Match the end caps to your bow
    Flat for an almost flat bow, medium bell for a decent curve, large bell for a sharper bow.
Different bow shape? Slotted V rollers · Deep V rollers · Flat rollers

4″ Semi V Rollers

For a bracket with a 4″ inside width
  • Model: RP-446
  • Actual width: 3 5/8″
  • Bolt: 1/2″
The Stoltz RP-446 is a 4-inch semi V bow roller made of polyurethane, for boats with a bow that has a slight curve. It fits a bow roller bracket with a 4″ inside width. Its actual width is 3 5/8″, slightly smaller than the bracket so it can spin, and it mounts on a 1/2″ bolt. Buy it as a single roller or as a complete bow stop kit (bow stop assembly) with flat, medium bell or large bell end caps.
Bracket diagram: a 4″ inside gap fits a 4″ Semi V roller
Is the inside gap of your bracket 4″? Choose a 4-inch roller below. It is built slightly smaller than the bracket so it can spin.

Is a semi V roller right for your boat?

Match the roller to the shape of your bow. A semi V roller fits a bow with a slight curve. If your bow is aluminum with a wide ridge, or fiberglass with a keel strip, use a slotted V roller. If it is fiberglass with a pointy, deep V bow, use a deep V roller. If it is completely flat, use a flat roller.

Semi V roller size

Inside bracket widthRollerModelActual roller widthBolt
4″4″ semi VRP-4463 5/8″1/2″

How to measure

Measure the inside width of your bow roller bracket. The 4″ semi V roller fits a 4″ bracket. All Stoltz bow rollers use a 1/2″ bolt.

How to choose end caps

Semi V rollers are offered with flat, medium bell and large bell end caps. Which one you need depends on the curve of your bow. End caps mount on the outside of the bracket on the same 1/2″ bolt as the roller.

  • Flat end caps: for a semi V bow that is almost flat.
  • Medium bell end caps: for a semi V bow with a decent curve.
  • Large bell end caps: for a sharper bow.

Your boat should rest on the center roller. The end caps guide the bow, and the boat should never bend them.

Semi V roller FAQ

What is a semi V bow roller?

A bow roller with a shallow V shape, made for a bow that has a slight curve rather than a sharp point.

What size is the Stoltz semi V roller?

4″ (RP-446). It fits a 4″ bracket and its actual width is 3 5/8″.

Which end caps go with a semi V roller?

Flat end caps for an almost-flat bow, medium bell for a bow with a decent curve, and large bell for a sharper bow.

Can I buy just the roller?

Yes. The 4″ semi V roller is sold on its own or as a kit with flat, medium bell or large bell end caps.

Do you ship outside the U.S.?

No. Boat Trailer Rollers ships within the United States only.

Is a bow roller kit the same as a bow stop?

Yes. A bow stop, or bow stop assembly, is the roller at the front of the trailer with its end caps. A Stoltz bow stop kit includes the center roller, 2 end caps, a stainless bolt, 2 washers and a lock nut. You can also buy just the roller to replace a worn one. Stoltz also sells V bumpers, also called V bow stops, in 3″ and 4″.

0